How is Concrete Different From Floor Screeds

In basic terms, the fundamental contrast between screed and concrete is the strength; concrete accomplishes an exceptionally high strength, though the smoother, more vulnerable screed material is regularly utilized for simply a top layer finish. To assist you with recognizing plainly among screed and concrete, we will look at the two materials depending on their arrangement, appearance, surface, uses, and strategy for the application. 

floor screeds- process

Concrete and screed and are framed of similar essential fixings – cement, totals, and water. In any case, what makes them diverse is the size of totals, the cement grade, blend consistency, and their expected application or use. 

Concrete floors can be chilly, lopsided, and unpleasant, so putting an underlay for the rug or overlay flooring straightforwardly onto the concrete can leave your floor looking and feeling not exactly awesome. To guarantee a smooth and even completion, prepared for your last flooring, you should lay a quality concrete screed. 

Piece and Blend Extent 

Concrete in its least difficult structure is a stone-like mass shaped by the solidifying of cement glue and totals blended in an extent of – 1Cement: 2Sand: 3Coarse totals (weight/rock). In any case, a few varieties are applied to this essential blend configuration to suit different utilizations and strength prerequisites. 

Screed then again is a slim layer of cement glue and sand/fine totals laid on to a concrete floor base or underfloor warming to go about as a smooth level evening out the surface for taking on the last floor finish. Screeds for the most part follow a blended extent of 1Cement: 3-5Sand (0-4mm washed sharp sand for an evening out screeds). 

For uncompromising screeds 25% of the 0-4mm sand is supplanted by 6-10mm single measured totals, making the blend extent 1:3:1 – cement:0-4mm sand:6-10mm single estimated totals. This is done to work with trowelling and to build the thickness of the screen. 


Concrete has a scope of employment as a building material, as a wearing surface, and in workmanship. It very well may be given a scope of wraps up from coarse to amazingly smooth, contingent upon the expected utilization of the concrete 

Interestingly, screed is utilized to make a smooth level surface for the last completion and isn’t planned to be utilized as a last wearing surface. In any case, screeds ought to have the option to offer adequate help and solidarity to withstand the traffic under its planned use. 

Consistency of blend 

Taking a gander at consistency – concrete is blended to a wetter consistency while the screed blend ought to be of a semi-dry, non-brittle consistency. For concrete, the droop rates rely upon the application and blend plan. 

Being a wetter blend, concrete is typically applied to utilize buoys or cylinder siphons, while the semi-dry screeds are introduced utilizing pneumatic siphons or constrained activity blenders. In any case, certain screeds that utilization an anhydrite base rather than cement are blended to a free-streaming consistency and are applied to utilize grout siphons/worm siphons.

How would I differentiate before they set? 

One of the vital contrasts between concrete and screed is the surface. This isn’t something that many individuals can see at first – or measure to the undeveloped eye. 

Concrete has a harsher surface than screed since it contains total and stones – just as sand and cement. These little stones are normally 20mm or less and are effectively invisible in the concrete when it is fluid. This is the thing that makes concrete the more grounded material. 

Screed is a sort of mortar. It is a smoother blend produced using sand and cement, a dirt sort substance and it doesn’t have the gravelly total, the most extreme grain size is around 4mm for a dry screed. This takes into consideration a better grain appearance when contrasted with concrete in its fluid structure. 

It’s been laid as of now! How would I differentiate now? 

If the surface has effectively been laid and the surface has solidified, the surface may not be not difficult to decide. You should take a gander at the strategy used to lay it and the area of the material to make a reasonable deduction. 

Screed is most regularly utilized as a completing layer on inner floors, with a thickness of around 50mm to 100mm. 

If the surface was laid utilizing coasts – it is most likely concrete. Concrete is normally laid a lot thicker, a base thickness is 100mm is prescribed for homegrown use and up to twofold that thickness for regions that have substantial footfall. 

Concrete and screed can both be utilized for flooring and with underfloor warming – yet it is profoundly improbable that a DIYer would lay concrete in their home without the assistance of an expert.

Read more: Keycoats, Gypsum Plaster Machine, Spraying Plaster On WallsCement Plaster, Floor Screeds.

Leave a Reply